آراد اتوماسیون

Automation Systems

Programmable Logic Controllers

Programmable Logic Controllers

 

کنترل کامل دستگاه از طریق یک رابط و یک نرم افزار تعریفی است که برای کنترل دستگاه  Sysmac ارائه میدهیم.Sysmac   کنترل کننده جدید و مقاوم و با قدرت بالا در زمینه اتوماسیون می باشد که ویژگی های متعددی را در کنار هم داراست.این ویژگی ها شامل:حرکت،تکرار،شبکه،یک نرم افزار جدید بنام Sysmac Studio که شامل پیکر بندی،شبیه سازی و نظارت،برنامه نویسی و یک ماشین EtherCAT  شبکه برای کنترل حرکت،تصویر،حسگرها و عملگرها می باشد.

 

مشاهده اطلاعات...

Industrial Fieldbus Solutions

Industrial Fieldbus Solutions

شرکت دلتا الکترونیک محصولات کاملی را برای درایو،موشن و دستگاه های کنترلی اتوماسیون صنعتی ارائه میدهد.همچنین به جز مدباس های عمومی دراری ارتباط سریال،CANOpen،DeviceNet،Ethernet/IP ، محصولات فیدباس  PROFIBUS را برای نیاز های صنعتی پیچیده ، کاربردهای دارای سرعت و پایداری بالا و همچنین بصرفه اقتصادی ،پیشنهاد و ارائه میدهیم.

مشاهده اطلاعات...

Industrial Ethernet

Industrial Ethernet

دلتا به تازگی تولید محصول کاملی از اترنت صنعتی با طراحی سخت افزاری پیشرفته،رابط نرم افزاری کاربرپسند و سازگار با پورت های ارتباطی استاندار صنعتی را آغاز نموده است.

مشاهده اطلاعات...

Human Machine Interface

Human Machine Interface

HMI محیطی برای تبادل اطلاعات ، ارتباط متقابل بین سیستم های الکترومکانیکی و کاربر میباشد.HMI به کاربر اجازه انجام تنظیمات از طریق تصاویر و کلید هایِ کاربر پسند روی صفحه لمسی میدهد.این سیستم نه تنها باعث کنترل راحت سیستم اتوماسیون میشود بلکه جایگزین پنل های کنترلی قدیمی که نیازمند سیم کشی فراوانی بودند،می شوند.

مشاهده اطلاعات...

Interesting to know

شروع اتوماسیون ریشه در قرن 18 دارد،زمانی که انسان برای اولین بار ماشین را جایگزین کار انسان کرد. ادامه مطلب...

Compact PLC Series

حداکثر ورودی و خروجی های دیجیتال
سرعت اجرای دستورات
حافظه برنامه نویسی
حافظه دیتا
توابع ویژه
شبکه ها

The EX series is the analog MPU with the lowest cost. Apart from supporting digital input and output, the EX series has built-in multiple analog I/O channels and integrates a variety of communication protocol’s for constructing a complete control network. EX series is suitable for all kinds of small PLC applications.

 

ES2 series is a small PLC for basic sequential control. It is economical, highly efficient and functional.


Specifications

 

‧MPU points: 20 (8DI/6DO, 4AI/2AO)
‧Max. I/O points: 238
‧Program capacity: 4K Steps
‧Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.
‧High-speed pulse output: Supports 2-point (Y0, Y1) independent high-speed pulse output of up to 10KHz.
‧Built-in 4-point high-speed counter

*Bandwidth refers to the max. counting range of a single counter.
‧Built-in analog I/O function

 

Downloads

 

en fa Title
 
-  Users Manual
-  CPU Users Manual
-  Instructions Reference Manual
-  Getting Started Guide
-  Communications Commands Reference Ma…

  • 238
  • *
  • 4K Steps
  • *
  • ‧High-speed pulse output: Supports 2-point (Y0, Y1) independent high-speed pulse output of up to 10KHz.
  • ‧Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.

Compact PLC Series

حداکثر ورودی و خروجی های دیجیتال
سرعت اجرای دستورات
حافظه برنامه نویسی
حافظه دیتا
توابع ویژه
شبکه ها

EH2 series is well equipped with outstanding operational speed, large programming capacity and built in application and communication instructions, multiple special extension modules and function cards, enabling the efficiency of the MPU to be utilized to its fullness.


Specifications

 

‧MPU points: 16 / 20 / 32 / 40 / 48 / 64 / 80
‧Max. I/O points: 512
‧Program capacity: 16K Steps
‧Instruction execution speed: 0.24µS (basic instruction)
‧Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol
‧Data register: 10,000 words
‧File register: 10,000 words
‧High-speed pulse output:
20-point and 32-point models support 2-point 200KHz pulse output (Y0, Y2); 40-point models support A/B phase 200KHz pulse output (Y0, Y1)(Y2, Y3) and 2-point 200KHz pulse output (Y4, Y6).
‧Built-in 4 groups of hardware high-speed counters

*Bandwidth refers to the max. counting range of a single counter.

Downloads

 

 

  • 512
  • 0.24µ
  • 16K Steps
  • 10,000 words
  • ‧High-speed pulse output
  • ‧Instruction execution speed: 0.24µS (basic instruction) ‧Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol

Modular PLC Series

حداکثر ورودی و خروجی ها
سرعت اجرای دستورات
حافظه برنامه نویسی
حافظه دیتا
توابع ویژه
شبکه ها

The slim and compact SX series supports digital input/output and is built in with multiple analog I/O channels.

Specifications

 

‧MPU points: 10 (4DI/2DO, 2AI/2AO)
‧Max. I/O points: 230
‧Program capacity: 8K Steps
‧Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.
‧High-speed pulse output: Supports 2-point independent high-speed pulse output (Y0 of up to 50KHz and Y1 of up to 10KHz).
‧Built-in high-speed counter

*Bandwidth refers to the max. counting range of a single counter.
‧Built-in analog I/O function

Downloads

 

 

  • 230
  • *
  • 8K Steps
  • *
  • High-speed pulse output: Supports 2-point independent high-speed pulse output (Y0 of up to 50KHz and Y1 of up to 10KHz). ‧Built-in high-speed counter
  • ‧Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.

Modular PLC Series


Warning: Invalid argument supplied for foreach() in /home/aradauto/domains/aradautomation.ir/public_html/templates/dade/html/com_k2/category_item.php on line 26

Compared to the standard Delta PLC, the slim and compact SA series offers larger program capacity and operation efficiency.


Specifications

 

‧MPU points: 12
‧Max. I/O points: 236
‧Program capacity: 8K Steps
‧Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.
‧High-speed pulse output: Supports 2-point independent high-speed pulse output (Y0 of up to 50KHz and Y1 of up to 10KHz).
‧Built-in high-speed counter

*Bandwidth refers to the max. counting range of a single counter.

Downloads

 

 

Modular PLC Series

حداکثر ورودی و خروجی ها
سرعت اجرای دستورات
حافظه برنامه نویسی
حافظه دیتا
توابع ویژه
شبکه ها

The 2nd generation DVP-SS2 series slim type PLC keeps the basic sequential control functions from the DVP-SS series PLC but with faster execution speed and enhanced real-time monitoring capability.

Specifications

 

MPU points: 14 (8DI + 6DO)
‧Max. I/O points: 494 (14 + 480)
‧Program capacity: 8k steps
‧COM port: Built-in RS-232 & RS-485 ports, compatible with Modbus ASCII/RTU protocol. Can be master or slave.
‧High-Speed Pulse Output:Supports 4 points (Y0 ~ Y3) of independent high-speed (max. 10kHz) pulse output
‧Supports PID Auto-tuning:DVP-SS2 saves parameters automatically after the PID auto temperature tuning is completed.
‧Built-in High-Speed Counters


Downloads

 

 

  • 494 (14 + 480)
  • *
  • 8k steps
  • *
  • ‧Supports PID Auto-tuning:DVP-SS2 saves parameters automatically after the PID auto temperature tuning is completed.
  • COM port: Built-in RS-232 & RS-485 ports, compatible with Modbus ASCII/RTU protocol. Can be master or slave.

Rack PLC Series

حداکثر ورودی و خروجی های دیجیتال
سرعت اجرای دستورات
حافظه برنامه نویسی
حافظه دیتا
توابع ویژه
شبکه ها

.Modularized Hardware Structure, Highly Integrated Software

.Highly integrated software ISPSoft: Graphical Interface with 5 programming languages
.Enhanced flexibility: Max. 100m between 2 local extension racks
.Improved maintainability: Hot-swapping function keeps the system running

Specifications

 

.Utilizes dual-core multi-tasking processor
.Excellent program execution speed: 0.3ms / 1k steps
.Max. I/O points:
    DIO: Max. 4,352 points
    AIO: Max. 544 channels
    RIO: Max. 125,440 digital points / 3,920 analog channels
.Program capacity: Max. 256k steps
.Data register: Max. 64k words
.CPU built-in with fully isolated RS-232/422/485,Mini-USB, Ethernet, SD Card 1.0(compatible with the memory cards on the market)
.Abundant selection of AIO modules, DIO modules, temperature modules, network modules, pulse-train and DMCNET motion control modules

Accessories

Large Scale Industrial Machines
The AH500 supports excellent motion control functions including 3-axis linear interpolation, 2-axis arc interpolation, and 3-axis helical interpolation. In addition, the AH500 is capable of controlling up to 12 axes or 4 groups of 3-axis interpolation synchronously at 1ms through Delta's high speed DMCNET motion control network. The AH500 satisfies requirements for complex processing or precise motion control and is effective for applications such as building material processors, warp knitting machines and food packaging machines.


System Applications
The AH500 is a modular system controller designed for almost all types of high-level automation tasks. Its abundant selection of I/O modules and the flexible system structure provide the best solutions for all kinds of system integration requirements. Through remote I/O expandability, you can build up the AH500 main station as a central control system and allocate the remote I/O systems on different floors for HVAC applications, or in different processing stations for the paper-making industry. The AH500 not only fulfills the application requirements for industrial machines or devices, but it also provides total solutions for automation systems.

Downloads

 

 

  • Max. 4,352 points
  • 0.3ms / 1k steps
  • Max. 256k steps
  • Max. 64k words
  • .Abundant selection of AIO modules, DIO modules, temperature modules, network modules, pulse-train and DMCNET motion control modules
  • .CPU built-in with fully isolated RS-232/422/485,Mini-USB, Ethernet, SD Card 1.0(compatible with the memory cards on the market)

Compact PLC Series

حداکثر ورودی و خروجی های دیجیتال
سرعت اجرای دستورات
حافظه برنامه نویسی
حافظه دیتا
توابع ویژه
شبکه ها

The advanced PM series motion control MPU can become the motion extension module of another PM series MPU, very flexible in all kinds of applications.


Specifications

 

‧MPU points: 16
‧Max. I/O points: 512
‧Program capacity: 64K Steps
‧Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.
‧Data register: 10,000 words (latched)
‧500KHz high-speed pulse output:
Built-in 2 groups of A/B phase differential signal ouput
X-axis pulse output: (FP0+, FP0-), (RP0+, RP0-)
Y-axis pulse output: (FP1+, FP1-), (RP1+, RP1-)
‧Supports Manual Pulse Generator (MPG) and multi-point external signal inputs

Downloads

 

 

  • 512
  • *
  • 64K Steps
  • 10,000 words (latched)
  • ‧500KHz high-speed pulse output
  • ‧Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.

Compact PLC Series

حداکثر ورودی و خروجی های دیجیتال
سرعت اجرای دستورات
حافظه برنامه نویسی
حافظه دیتا
توابع ویژه
شبکه ها

EC3 series is the most economical solution for sequential control and communication monitoring and can operate independently, allowing the user to achieve stand-alone monitor, e.g. monitoring phototransistor coupler, proximity switch, optical sensor, indicator and illumination switch. Through serial ports, EC3 is able to connect to control devices such as PLC, frequency inverter and temperature controller, which can be said to be a programmable application solution that is cost-friendly and highly reliable.

 

Specifications

‧MPU points: 10/ 14 / 16 / 24 / 32 / 60
‧Max. I/O points: 60
‧Program capacity: 4k steps
‧COM ports: Built-in RS-232 and RS-485 ports (available in 16-60 point models); compatible with Modbus ASCII/RTU protocol
‧Built-in 4 points of high-speed counters*:

*Refers to the max. counting range for a single counter.




 

 

  • 60
  • *
  • 4k steps
  • *
  • Through serial ports, EC3 is able to connect to control devices such as PLC, frequency inverter and temperature controller, which can be said to be a programmable application solution that is cost-friendly and highly reliable
  • COM ports: Built-in RS-232 and RS-485 ports (available in 16-60 point models); compatible with Modbus ASCII/RTU protocol

Modular PLC Series

حداکثر ورودی و خروجی ها
سرعت اجرای دستورات
حافظه برنامه نویسی
حافظه دیتا
توابع ویژه
شبکه ها

The left-side parallel high speed extension interface on SV series is able to connect to all kinds of network interface, e.g. Ethernet, DeviceNet, ProfiBus, analog and temperature modules for the demand of immediate control. 16 special extension modules (digital, analog, axis control, communication, etc.) are connectable to SV series (8 on the left and 8 on the right). The built-in 200KHz 4-axis independent pulse output and the featured 2 groups of linear/arc interpolation motion control instructions offer an easy positioning control solution.

Specifications

 

‧MPU points: 28
‧Max. I/O points: 512
‧Program capacity: 16K Steps
‧Instruction execution speed: 0.24μS (basic instruction)
‧Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.
‧Data register: 10,000 words
‧File register: 10,000 words
‧High-speed pulse output: Supports 4-point (Y0, Y2, Y4, Y6) high-speed pulse output, 2-group (Y0, Y1) (Y2, Y3) A/B phase pulse output and 2-group (Y0 ~ Y3 & Y4 ~ Y7) 2-axis interpolation. All outputs can reach 200KHz.
‧Built-in 4 groups of hardware high-speed counters

*Bandwidth refers to the max. counting range of a single counter.

Downloads

 

 

  • 512
  • 0.24μS
  • 16K Steps
  • 10,000 words
  • ‧High-speed pulse output: Supports 4-point (Y0, Y2, Y4, Y6) high-speed pulse output, 2-group (Y0, Y1) (Y2, Y3) A/B phase pulse output and 2-group (Y0 ~ Y3 & Y4 ~ Y7) 2-axis interpolation. All outputs can reach 200KHz.
  • ‧Communication port: Built-in RS-232 and RS-485, compatible with MODBUS ASCII / RTU communication protocol.

Ethernet

Transmission method
Baudrate
Power supply voltage
Power consumption
Insulation voltage

‧For DVP-EH2-L, DVP-SX2 and DVP-SV series PLC only
‧Supports Modbus TCP protocol
‧Max. baudrate: 100M bps
‧Modbus TCP connections
    Client: 32
    Server: 16
‧Smart data exchange
‧RTU mapping
‧Simple firewall
‧E-mail alarm

 

Specifications

‧Transmission method: IEEE 802.3, IEEE 802.3u
‧Transmission interface: RJ-45 MDI/MDIX, no jumper cable required
‧Baudrate: 10/100 Mbps, auto-detection
‧Network protocols: ICMP, IP, TCP, UDP, DHCP, SMTP, NTP, Modbus TCP
‧Power supply voltage: 24 VDC (-15 to 20%)
‧Power consumption: 1.5 W
‧Insulation voltage: 500 V




  • IEEE 802.3, IEEE 802.3u
  • 10/100 Mbps, auto-detection
  • 24 VDC (-15 to 20%)
  • 1.5 W
  • 500 V

Ethernet

Transmission method
Baudrate
Power supply voltage
Power consumption
Insulation voltage

‧A Modbus TCP slave
‧Connectable to 8 DVP-S series analog I/O modules
‧Connectable to 256 points of digital I/O modules
‧The RS-485 port is connectable to max. 32 Modbus slaves
‧Smart PLC if-then function
‧Smart Monitor
‧Supports webpage setup & on-line monitoring
‧Serial Virtual COM available

Specifications

 

Network Interface:
‧Transmission method: IEEE 802.3, IEEE 802.3u
‧Transmission interface: RJ-45 MDI/MDIX, no jumper cable required
‧Baudrate: 10/100M bps, auto-detection
‧Network protocols: ICMP, IP, TCP, UDP, DHCP, NTP, Modbus TCP, HTTP
‧Power supply voltage: 24 VDC (-15 to 20%)
‧Power consumption: 2 W
‧Insulation voltage: 500 V
RS-485 Interface:
‧Transmission method: RS-485
‧Connector: Removable
‧Serial baudrate: 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps
‧Data type: Modbus ASCII/RTU

  • IEEE 802.3, IEEE 802.3u
  • 10/100M bps, auto-detection
  • 24 VDC (-15 to 20%)
  • 2 W
  • 500 V

Ethernet

Transmission method
Baudrate
Power supply voltage
Power consumption
Insulation voltage

‧Isolation in RS-485 channel (incl. power supply)
‧Supports Modbus TCP protocol
‧Smart Monitor
‧Supports webpage setup & on-line monitoring
‧Serial Virtual COM available
‧3 e-mail alarms (DI)

 

Specifications

Network Interface:
‧Transmission method: IEEE 802.3, IEEE 802.3u
‧Transmission interface: RJ-45 MDI/MDIX, no jumper cable required
‧Baudrate: 10/100M bps, auto-detection
‧Network protocols: ICMP, IP, TCP, UDP, DHCP, SMTP, Modbus TCP
‧Power supply voltage: 24 VDC (-15 to 20%)
‧Power consumption: 3 W
‧Insulation voltage: 500 V
RS-485 Interface:
‧Connector 1: RJ-11, 10-pin feed through terminal
‧Connector 2: 3-pin, removable
‧Transmission method: RS-485
‧Serial baudrate: 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps
‧Data type: Modbus ASCII/RTU, user-defined




  • IEEE 802.3, IEEE 802.3u
  • 10/100M bps, auto-detection
  • 24 VDC (-15 to 20%)
  • 3 W
  • 500 V

DeviceNet

Transmission method
Serial baudrate
Network voltage
Connector
Message type

‧Supports DeviceNet protocol
‧For DVP-S series PLC only
‧Max. baudrate: 500k bps

Specifications

‧Transmission method: CAN
‧Connector: Removable, 5.08mm
‧Message type: Explicit, I/O polled
‧Serial baudrate: 125k, 250k, 500k bps
‧Network voltage: 24 VDC (11 to 25 VDC)
‧Electrical isolation: 500 VDC


  • CAN
  • 125k, 250k, 500k bps
  • 24 VDC (11 to 25 VDC)
  • Removable, 5.08mm
  • Explicit, I/O polled

DeviceNet

Transmission method
Serial baudrate
Network voltage
Connector
Message type

‧Supports DeviceNet protocol
‧Connectable to 8 DVP-S series analog I/O modules
‧Connectable to 256 points of digital I/O modules
‧The RS-485 port is connectable to max. 8 Modbus slaves
‧Max. baudrate: 500k bps

 

Specifications

‧Transmission method: CAN
‧Connector: Removable, 5.08mm
‧Message type: Explicit, I/O polled
‧Serial baudrate: 125, 250, 500k bps
‧Network voltage: 24 VDC (11 to 25 VDC)


  • CAN
  • 125, 250, 500k bps
  • 24 VDC (11 to 25 VDC)
  • Removable, 5.08mm
  • Explicit, I/O polled

DeviceNet

Transmission method
Serial baudrate
Network voltage
Connector
Message type

‧Supports DeviceNet protocol
‧Connectable to all Delta’s industrial automation products
‧Isolation in DeviceNet channel (incl. power supply)
‧Passed full compatibility test

 

Specifications

‧Transmission method: CAN
‧Electrical isolation: 500 VDC
‧Connector: Removable, 5.08mm
‧Transmission cables: 2 communication cables, 2 power cables, 1 shielded cable
‧Serial baudrate: 125, 250, 500k bps
‧Network voltage: 24 VDC (11 to 25 VDC)
‧Current: 28 mA (typical), 125 mA impulse current (24 VDC)


  • CAN
  • 125, 250, 500k bps
  • 24 VDC (11 to 25 VDC)
  • Removable, 5.08mm
  • Explicit, I/O polled

DeviceNet

Transmission method
Serial baudrate
Network voltage
Connector
Message type

‧Supports DeviceNet protocol
‧For DVP-EH2 series PLC only
‧Max. baudrate: 500k bps

 

Specifications

‧Transmission method: CAN
‧Connector: Removable, 5.08mm
‧Message type: Explicit, I/O polled
‧Serial baudrate: 125k, 250k, 500k bps
‧Network voltage: 24 VDC (11 to 25VDC)
‧Electrical isolation: 500 VDC


  • CAN
  • 125k, 250k, 500k bps
  • 24 VDC (11 to 25VDC)
  • Removable, 5.08mm
  • Explicit, I/O polled

CANopen

Transmission method
Serial baudrate
Network voltage
Connector
Message type

‧For DVP-EH2-L, DVP-SX2 and DVP-SV series PLC only
‧Supports CANopen protocol
‧Connectable to 110 slaves
‧Max. baudrate: 1M bps
‧Max. network length: 1,000m

 

Specifications

‧Transmission method: CAN
‧Connector: Removable, 5.08mm
‧Serial baudrate: 10k, 20k, 50k, 125k, 250k, 500k, 800k, 1M bps
‧Message type: PDO, SDO, SYNC, Emergency, NMT
‧Power supply voltage: 24 VDC (-15 to 20%)
‧Power consumption: 1.7 W
‧Electrical isolation: 500 VDC


  • CAN
  • 10k, 20k, 50k, 125k, 250k, 500k, 800k, 1M bps
  • *
  • Removable, 5.08mm
  • PDO, SDO, SYNC, Emergency, NMT

CANopen

Transmission method
Serial baudrate
Network voltage
Connector
Message type

‧For DVP-EH2 series PLC only
‧Supports CANopen protocol
‧Max. baudrate: 1M bps

 

Specifications

‧Transmission method: CAN
‧Connector: Removable, 5.08mm
‧Serial baudrate: 10k, 20k, 50k, 125k, 250k, 500k, 800k, 1M bps
‧Message type: PDO, SDO, SYNC, Emergency, NMT
‧Power supply voltage: 24 VDC (-15 to 20%)
‧Power consumption: 1.7 W
‧Electrical isolation: 500 VDC


  • CAN
  • 10k, 20k, 50k, 125k, 250k, 500k, 800k, 1M bps
  • *
  • Removable, 5.08mm
  • PDO, SDO, SYNC, Emergency, NMT

CANopen

Transmission method
Serial baudrate
Network voltage
Connector
Message type

‧Supports CANopen protocol
‧Connectable to all Delta@@s industrial automation products
‧Isolation in CANopen channel (incl. power supply)
‧Passed full compatibility test

 

Specifications

‧Transmission method: CAN
‧Electrical isolation: 500 VDC
‧Connector: Removable, 5.08mm
‧Transmission cables: 2 communication cables, 2 power cables, 1 shielded cable
‧Serial baudrate: 10k, 20k, 50k, 125k, 250k, 500k, 800k, 1M bps
‧Power supply voltage: 24 VDC (-15 to 20%)
‧Current: 28 mA (typical), 125 mA impulse current (24 DC)


  • CAN
  • 10k, 20k, 50k, 125k, 250k, 500k, 800k, 1M bps
  • *
  • Removable, 5.08mm
  • Explicit, I/O polled

CANopen

Transmission method
Serial baudrate
Network voltage
Connector
Message type

‧For DVP-PM series PLC only
‧Complies with CANopen DS301 V4.0.2 Sync, PDO, SDO and NMT
‧Supports 126 asynchronous axes in CANopen DSP402 V2.1 through SDO
‧Supports 4 synchronous axes in CANopen DS402 V2.1
‧Built-in commands to control Delta ASDA-A2 series servo system
‧PLCopen Like Function Block

 

Specifications

Network Interface:
‧Transmission method: IEEE 802.3, IEEE 802.3u
‧Baudrate: 10/100M bps
‧Transmission distance: 100m
CAN Interface:
‧Message type: PDO, SDO, SYNC, Emergency, NMT
‧Connector: Removable, 5.08mm
‧Serial baudrate: 500k, 1M bps
‧Power consumption: 1.7 W
‧Insulation voltage: 500 V


  • IEEE 802.3, IEEE 802.3u
  • 500k, 1M bps
  • *
  • Removable, 5.08mm
  • PDO, SDO, SYNC, Emergency, NMT

Modbus Serial

Transmission method
Baudrate
Connector

‧A serial signal regenerator
‧Extends RS-422/485 transmission to 1.2km
‧Connectable to 32 RS-485 devices
‧Isolation in RS-485 channel (incl. power supply)

 

Specifications

‧Power supply: +9 to +35 VDC
‧Power consumption: 1.6 W
‧Insulation voltage: 3,000 VDC
‧Baudrate: 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps
‧Terminal: 10-pin, accepts AWG1-#12 to #24 wires
‧Dimensions (L×W×H): 4.80×2.79×0.87in (122mm×71mm×22mm)


  • *
  • 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps
  • Connectable to 32 RS-485 devices

Modbus Serial

Transmission method
Baudrate
Connector

‧For DVP-EH2 series PLC only
‧A RS-232 communication card
‧As an additional RS-232 port for COM3

 

Specifications

‧Transmission method: RS-232
‧Connector: DB-9
‧Baudrate: 9,600, 19,200, 38,400 bps


  • RS-232
  • 9,600, 19,200, 38,400 bps
  • DB-9

Modbus Serial

Transmission method
Baudrate
Connector

‧Supports Modbus protocol
‧Connectable to 8 DVP-S series analog I/O modules
‧Connectable to 256 points of digital I/O modules
‧Max. baudrate: 115.2k bpsk

 

Specifications

‧Transmission method: RS-485
‧Connector: 3-pin, removable
‧Serial baudrate: 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps
‧Data type: Modbus ASCII/RTU
‧Power supply voltage: 24 VDC (-15 to 20%)


  • RS-485
  • 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps
  • 3-pin, removable

Modbus Serial

Transmission method
Baudrate
Connector

‧PLC extension module to amplify signals for the left-side communication and support uploading and downloading of PLC program and parameters
‧Provides two stand-alone RS-485/RS-422 ports
‧Supports standard MODBUS protocol
‧Supports user-defined communication protocol
‧Fully isolates communication interfaces and highly capable in resisting interferences

 

Specifications

‧Transmission method: RS-485/RS-422
‧Connector type: Euro-type terminal blocks with feed-through terminals and spring plugs
‧Terminal resistors: built-in and changed-over by switches
‧Serial baudrates: 1,200、2,400、4,800、9,600、19,200、38,400、57,600、115,200、230,400、460,800 bps
‧Data type: Modbus ASCII/RTU、UD Link (user-defined communication protocol)


 

  • RS-485/RS-422
  • 1,200、2,400、4,800、9,600、19,200、38,400、57,600、115,200、230,400、460,800 bps
  • Euro-type terminal blocks with feed-through terminals and spring plugs

PROFIBUS

Transmission method
Connector
Serial baudrate
Message type
Power supply voltage

‧A PROFIBUS DP slave module for DVP-S series PLC only
‧Supports PROFIBUS DP protocol
‧Max. baudrate: 12M bps
‧With RS-485 port, connectable to max. 16 devices

 

Specifications

‧Transmission method: High-speed RS-485
‧Connector: DB9
‧Serial baudrate: 9.6k, 19.2k, 93.75k, 187.5k, 500k, 1.5M, 3M, 6M, 12M bps
‧Message type: DPV0
‧Power supply voltage: 24 VDC (-15 to 20%)


  • High-speed RS-485
  • DB9
  • 9.6k, 19.2k, 93.75k, 187.5k, 500k, 1.5M, 3M, 6M, 12M bps
  • DPV0
  • 24 VDC (-15 to 20%)

PROFIBUS

Transmission method
Connector
Serial baudrate
Message type
Power supply voltage

‧A PROFIBUS DP slave module for DVP-EH2 series PLC only
‧Supports PROFIBUS DP protocol
‧Max. baudrate: 12M bps

 

Specifications

‧Transmission method: High-speed RS-485
‧Connector: DB9
‧Serial baudrate: 9.6k, 19.2k, 93.75k, 187.5k, 500k, 1.5M, 3M, 6M, 12M bps
‧Message type: DPV0
‧Power supply voltage: 24 VDC (-15 to 20%)


  • High-speed RS-485
  • DB9
  • 9.6k, 19.2k, 93.75k, 187.5k, 500k, 1.5M, 3M, 6M, 12M bps
  • DPV0
  • 24 VDC (-15 to 20%)

PROFIBUS

Transmission method
Connector
Serial baudrate
Message type
Power supply voltage

‧A Left-side high-speed PROFIBUS DP slave module for DVP-S series PLC only.
‧Supports PROFIBUS DP protocol
‧Auto detection for transmission speed. Max. baudrate: 12Mbps
‧Supports cyclic data transmission between master module.
‧Data transmission: supports up to 100 words of I/O inputs and 100 words of I/O outputs

 

Specifications

‧Transmission method: High-speed RS-485
‧Connector: D-SUB 9
‧Serial baudrate: 9.6k, 19.2k, 93.75k, 187.5k, 500k, 1.5M, 3M, 6M, 12M bps
‧Message type: DPV0
‧Power supply voltage: 24 VDC (-15 to 20%)


  • High-speed RS-485
  • D-SUB 9
  • 9.6k, 19.2k, 93.75k, 187.5k, 500k, 1.5M, 3M, 6M, 12M bps
  • DPV0
  • 24 VDC (-15 to 20%)

PROFIBUS

Transmission method
Connector
Serial baudrate
Message type
Power supply voltage

‧A PROFIBUS DP remote communication module
‧Supports PROFIBUS DPV0 cyclic data transmission
‧Auto-detects baudrate, diagnosis
‧Max. baudrate: 12M bps
‧Connectable to 8 DVP-S series analog I/O modules
‧Connectable to 256 points of digital I/O modules
‧RS-485 port is connectable to max. 16 Modbus slaves
‧Supports max. 100 bytes of I/O data input and 100 bytes of output

 

Specifications

‧Transmission method: High-speed RS-485
‧Connector: DB9
‧Serial baudrate: 9.6k, 19.2k, 93.75k, 187.5k, 500k, 1.5M, 3M, 6M, 12M bps
‧Message type: DPV0
‧Power supply voltage: 24 VDC (-15 to 20%)
‧Power consumption: 2.5 W
‧Insulation voltage: 500 VDC


  • High-speed RS-485
  • DB9
  • 9.6k, 19.2k, 93.75k, 187.5k, 500k, 1.5M, 3M, 6M, 12M bps
  • DPV0
  • 24 VDC (-15 to 20%)

BACnet

Transmission method
Type
Terminal resistance
Baudrates
Communication protocol

‧Supports BACnet MS/TP slave protocol
‧Easy to be connected and controlled via software of other brands
‧Functions as BACnet MS/TP remote I/O or gateway
‧Supports MODBUS with user-defined protocol
‧High noise immunity
‧High speed module on the left (PLC needed)

 

Specifications

‧Transmission method: RS-485/RS-422
‧Type : Feed-through terminals, with spring plugs
‧Terminal resistance : built in 120 ohm with a switch
‧Baudrates : 1,200、2,400、4,800、9,600、19,200、38,400、57,600、76,800,、115,200、230,400、460,800 bps
‧Communication protocol : BACnet MS/TP Slave、MODBUS ASCII/RTU、UD Link


  • RS-485/RS-422
  • Feed-through terminals, with spring plugs
  • built in 120 ohm with a switch
  • 1,200、2,400、4,800、9,600、19,200、38,400、57,600、76,800,、115,200、230,400、460,800 bps
  • BACnet MS/TP Slave、MODBUS ASCII/RTU、UD Link

8-port

Ethernet port
Standards
Processing Type
Switching Capacity

‧Redundant 12 to 48VDC terminal block power input
‧Supports IEEE 802.1p based QoS for packet forwarding precedence
‧Broadcast Storm Protection
‧Transparent transmission of VLAN tagged packets
‧Auto warning for link-down and power failure by relay output
‧Fanless, IP30 Aluminum case
‧Patent combination design for DIN-RAIL and Wall mounting installation
‧Wide operating temperature -40℃ to 75℃
‧UL508/60950-1, CE and FCC certificated

 

Specifications

‧Ethernet port: 8 10/100Base-T(X)
‧Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-T(X), IEEE 802.3x, IEEE 802.1p
‧Processing Type: Store and Forward
‧IEEE 802.3x flow control in full duplex, back-pressure flow control in half duplex, auto-MDI/MDI-X, non-blocking, wired speed
‧Switching Capacity: 1.6Gbps
‧MAC Table: 8K
‧Packet Buffer Memory: 1M bits
‧Packet Size: 64 to 1522 bytes
‧Dip Switches: 5-pin, port link-down configuration
‧Alarm Relay: MAX 5A@24VDC


  • 8 10/100Base-T(X)
  • IEEE 802.3 10Base-T, IEEE 802.3u 100Base-T(X), IEEE 802.3x, IEEE 802.1p
  • Store and Forward
  • 1.6Gbps

8-port

Ethernet port
Standards
Processing Type
Switching Capacity

‧Redundant 12 to 48VDC terminal block power input
‧Supports IEEE 802.1p based QoS for packet forwarding precedence
‧Broadcast Storm Protection
‧Transparent transmission of VLAN tagged packets
‧Auto warning for link-down and power failure by relay output
‧Fanless, IP30 Aluminum case
‧Patent combination design for DIN-RAIL and Wall mounting installation
‧Wide operating temperature -40℃ to 75℃
‧UL508/60950-1, CE and FCC certified

 

Specifications

‧Ethernet port: 7 10/100Base-T(X) + 1 100Base-FX (SC type, MultiMode)
‧Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-T(X) and 100Base-FX, IEEE 802.3x, IEEE 802.1p
‧Processing Type: Store and Forward
‧IEEE 802.3x flow control in full duplex, back-pressure flow control in half duplex, auto-MDI/MDI-X, non-blocking, wired speed
‧Switching Capacity: 1.6Gbps
‧MAC Table: 8K
‧Packer Buffer Memory: 1M bits
‧Packet Size: 64 to 1522 bytes
‧Dip Switches: 5-pin, port link-down configuration
‧Alarm Relay: MAX 5A@24VDC


  • 7 10/100Base-T(X) + 1 100Base-FX (SC type, MultiMode)
  • IEEE 802.3 10Base-T, IEEE 802.3u 100Base-T(X) and 100Base-FX, IEEE 802.3x, IEEE 802.1p
  • Store and Forward
  • 1.6Gbps

16-port

Ethernet port
Standards
Processing Type
Switching Capacity

‧Redundant 12 to 48VDC terminal block power input
‧Supports IEEE 802.1p based QoS for packet forwarding precedence
‧Broadcast Storm Protection
‧Transparent transmission of VLAN tagged packets
‧Auto warning for link-down and power failure by relay output
‧Fanless, IP30 Aluminum case
‧Patent combination design for DIN-RAIL and Wall mounting installation
‧Wide operating temperature -40℃ to 75℃
‧UL508/60950-1, CE and FCC certified

 

Specifications

‧Ethernet port: 16 10/100Base-T(X)
‧Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-T(X), IEEE 802.3x, IEEE 802.1p
‧Processing Type: Store and Forward
‧IEEE 802.3x flow control in full duplex, back-pressure flow control in half duplex, auto-MDI/MDI-X, non-blocking, wired speed
‧Switching Capacity: 3.2Gbps
‧MAC Table: 8K
‧Packer Buffer Memory: 1M bits
‧Packet Size: 64 to 1522 bytes
‧Dip Switches: 5-pin, port link-down configuration
‧Alarm Relay: MAX 5A@24VDC


  • 16 10/100Base-T(X)
  • IEEE 802.3 10Base-T, IEEE 802.3u 100Base-T(X), IEEE 802.3x, IEEE 802.1p
  • Store and Forward
  • 3.2Gbps

16-port

Ethernet port
Standards
Processing Type
Switching Capacity

‧Redundant 12 to 48VDC terminal block power input
‧Supports IEEE 802.1p based QoS for packet forwarding precedence
‧Broadcast Storm Protection
‧Transparent transmission of VLAN tagged packets
‧Auto warning for link-down and power failure by relay output
‧Fanless, IP30 Aluminum case
‧Patent combination design for DIN-RAIL and Wall mounting installation
‧Wide operating temperature -40℃ to 75℃
‧UL508/60950-1, CE and FCC certified

 

 

Specifications

‧Ethernet port: 15 10/100Base-T(X) + 1 100Base-FX(SC type, MultiMode)
‧Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-T(X) and 100Base-FX, IEEE 802.3x, IEEE 802.1p
‧Processing Type: Store and Forward
‧IEEE 802.3x flow control in full duplex, back-pressure flow control in half duplex, auto-MDI/MDI-X, non-blocking, wired speed
‧Switching Capacity: 3.2Gbps
‧MAC Table: 8K
‧Packet Buffer Memory: 1M bits
‧Packet Size: 64 to 1522 bytes
‧Dip Switches: 5-pin, port link-down configuration
‧Alarm Relay: MAX 5A@24VDC

 


  • 15 10/100Base-T(X) + 1 100Base-FX(SC type, MultiMode)
  • IEEE 802.3 10Base-T, IEEE 802.3u 100Base-T(X) and 100Base-FX, IEEE 802.3x, IEEE 802.1p
  • Store and Forward
  • 3.2Gbps

5-port

Ethernet port
Standards
Processing Type
Switching Capacity

‧12 to 48VDC terminal block power input
‧Fanless, IP30 Aluminum case
‧Patent combination design for DIN-RAIL and Wall mounting installation
‧Operating temperature -10℃ to 60℃
‧UL508/60950-1, CE and FCC certified

 

Specifications

‧Ethernet port: 5 10/100Base-T(X)
‧Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-T(X), IEEE 802.3x
‧Processing Type: Store and Forward
‧IEEE 802.3x flow control in full duplex, back-pressure flow control in half duplex, auto-MDI/MDI-X, non-blocking, wired speed
‧Switching Capacity: 1Gbps
‧MAC Table: 1K
‧Packet Buffer Memory: 512K bits
‧Packet Size: 64 to 1522 bytes


  • 5 10/100Base-T(X)
  • IEEE 802.3 10Base-T, IEEE 802.3u 100Base-T(X), IEEE 802.3x
  • Store and Forward
  • Capacity: 1Gbps

5-port

Ethernet port
Standards
Processing Type
Switching Capacity
  • 5 10/100Base-T(X)
  • IEEE 802.3 10Base-T, IEEE 802.3u 100Base-T(X), IEEE 802.3x
  • Store and Forward
  • 1Gbps

5-port

Ethernet port
Standards
Processing Type
Switching Capacity

‧Redundant 12 to 48VDC terminal block power input
‧Auto warning for link-down and power failure by relay output
‧Fanless, IP30 Aluminum case
‧Patent combination design for DIN-RAIL and Wall mounting installation
‧Wide operating temperature -40℃ to 75℃
‧UL508/60950-1, CE and FCC certified

 

Specifications

‧Ethernet port: 4 10/100Base-T(X) + 1 100Base-FX (SC type, MultiMode)
‧Standards: IEEE 802.3 10Base-T, IEEE 802.3u 100Base-T(X) and 100Base-FX, IEEE 802.3x
‧Processing Type: Store and Forward
‧IEEE 802.3x flow control in full duplex, back-pressure flow control in half duplex, auto-MDI/MDI-X, non-blocking, wired speed
‧Switching Capacity: 1Gbps
‧MAC Table: 1K
‧Packet Buffer Memory: 512K bits
‧Packet Size: 64 to 1522 bytes
‧Dip Switches: 5-pin, port link-down configuration
‧Alarm Relay: MAX 5A@24VDC


  • 4 10/100Base-T(X) + 1 100Base-FX (SC type, MultiMode)
  • IEEE 802.3 10Base-T, IEEE 802.3u 100Base-T(X) and 100Base-FX, IEEE 802.3x
  • Store and Forward
  • 1Gbps

DOP-AS Series

Touch screen
Display
Resolution
Memory
USB
Languages

DOP-AS series provides standard functions for basic user's requirements. Currently, the display sizes of 3.8", 5.7" with monochrome or colorful, light and compact features are available.

 

Specifications

‧3.5" TFT LCD 65536 colors
‧ARM9 32-bit CPU
‧320 x 240 pixels
‧4 function keys
‧1M Flash Memory
‧128K bytes SRAM
‧Supports USB Host, direct connection to USB disk and printer
‧USB 1.1 for high-speed program and data download
‧3 sets of COM ports for different communication protocols
‧Max. 8 different languages for multilingual screen editing
‧Touch screens comply with IP65 / NEMA4 standards
‧CE & UL approved


  • Touch screens comply with IP65 / NEMA4 standards
  • 3.5" TFT LCD 65536 colors
  • 320 x 240 pixels
  • 1M Flash Memory 128K bytes SRAM
  • USB 1.1 for high-speed program and data download
  • Max. 8 different languages for multilingual screen editing

DOP-AS Series

Touch screen
Display
Resolution
Memory
USB
Languages

DOP-AS series provides standard functions for basic user's requirements. Currently, the display sizes of 3.8", 5.7" with monochrome or colorful, light and compact features are available.

 

Specifications

‧3.5" TFT LCD 65536 colors
‧3.8", 5.7" STN LCD 8 Shades of Blue
‧ARM9 32-bit CPU
‧320 x 240 pixels
‧4 function keys
‧1M Flash Memory
‧128K bytes SRAM
‧Supports USB Host, direct connection to USB disk and printer
‧USB 1.1 for high-speed program and data download
‧3 sets of COM ports for different communication protocols
‧Max. 8 different languages for multilingual screen editing
‧Touch screens comply with IP65 / NEMA4 standards
‧CE & UL approved


  • Touch screens comply with IP65 / NEMA4 standards
  • 3.8" STN LCD 8 Shades of Blue
  • 320 x 240 pixels
  • 1M Flash Memory 128K bytes SRAM
  • USB 1.1 for high-speed program and data download
  • Max. 8 different languages for multilingual screen editing

DOP-AS Series

Touch screen
Display
Resolution
Memory
USB
Languages

DOP-AS series provides standard functions for basic user's requirements. Currently, the display sizes of 3.8", 5.7" with monochrome or colorful, light and compact features are available.

 

Specifications


5.7" STN LCD 8 Shades of Blue
‧ARM9 32-bit CPU
‧320 x 240 pixels
‧4 function keys
‧1M Flash Memory
‧128K bytes SRAM
‧Supports USB Host, direct connection to USB disk and printer
‧USB 1.1 for high-speed program and data download
‧3 sets of COM ports for different communication protocols
‧Max. 8 different languages for multilingual screen editing
‧Touch screens comply with IP65 / NEMA4 standards
‧CE & UL approved


  • Touch screens comply with IP65 / NEMA4 standards
  • 5.7" STN LCD 8 Shades of Blue
  • 320 x 240 pixels
  • 1M Flash Memory 128K bytes SRAM
  • USB 1.1 for high-speed program and data download
  • Max. 8 different languages for multilingual screen editing

DOP-B Series

Touch screen
Display
Resolution
Memory
USB
Languages

 

Specifications

‧7"(800 x 480 pixels) TFT LCD 65536 colors
‧3 sets of COM ports, support RS232 / RS422 / RS485
‧For data transfer/download: RS232, USB
‧Supports USB Host, direct connection to USB disk, printer and mouse
‧Touch screen complies with IP65
‧Supports horizontal / vertical display
‧Editing software, DOPSoft is compatible with operating systems: Windows XP, Windows Vista, Windows 7

  • Touch screen complies with IP65
  • 7" TFT LCD 65536 colors
  • 800 x 480 pixels
  • *
  • Supports USB Host, direct connection to USB disk, printer and mouse
  • *

DOP-B Series

Touch screen
Display
Resolution
Memory
USB
Languages

Specifications

 

‧7"(800 x 480 pixels) TFT LCD 65536 colors
‧3 sets of COM ports, support RS232 / RS422 / RS485
‧For data transfer/download: RS232, USB
‧Supports USB Host, direct connection to USB disk, printer and mouse
‧Supports SD card
‧Touch screen complies with IP65
‧Supports horizontal / vertical display
‧Editing software, DOPSoft is compatible with operating systems: Windows XP, Windows Vista, Windows 7

  • Touch screen complies with IP65
  • 7" TFT LCD 65536 colors
  • 800 x 480 pixel
  • Supports SD card
  • Supports USB Host, direct connection to USB disk, printer and mouse
  • *

DOP-B Series

Touch screen
Display
Resolution
Memory
USB
Languages

Specifications

‧7"(800 x 600 pixels) TFT LCD 65536 colors
‧3 sets of COM ports, support RS232 / RS422 / RS485
‧For data transfer/download: RS232, USB
‧Supports USB Host, direct connection to USB disk, printer and mouse
‧Supports SD card
‧Touch screen complies with IP65
‧Supports horizontal / vertical display
‧Editing software, DOPSoft is compatible with operating systems: Windows XP, Windows Vista, Windows 7


  • Touch screen complies with IP65
  • 7" TFT LCD 65536 colors
  • 800 x 600 pixel
  • Supports SD card
  • Supports USB Host, direct connection to USB disk, printer and mouse
  • *

DOP-B Series

Touch screen
Display
Resolution
Memory
USB
Languages

Specifications

‧7"(800 x 600 pixels) TFT LCD 65536 colors
‧3 sets of COM ports, support RS232 / RS422 / RS485
‧For data transfer/download: RS232, USB, Ethernet
‧Supports USB Host, direct connection to USB disk, printer and mouse
‧Supports SD card
‧Supports Ethernet
‧Supports audio output (MP3, Wav files)
‧Touch screen complies with IP65
‧Supports horizontal / vertical display
‧Editing software, DOPSoft is compatible with operating systems: Windows XP, Windows Vista, Windows 7


  • Touch screen complies with IP65
  • 7" TFT LCD 65536 colors
  • 800 x 600 pixel
  • Supports SD card
  • Supports USB Host, direct connection to USB disk, printer and mouse
  • *

DOP-B Series

Touch screen
Display
Resolution
Memory
USB
Languages

Specifications

 

‧10.1"(1024 x 600 pixels) TFT LCD 65536 colors
‧3 sets of COM ports, support RS232 / RS422 / RS485
‧For data transfer/download: RS232, USB, Ethernet
‧Supports USB Host, direct connection to USB disk, printer and mouse
‧Supports SD card
‧Supports Ethernet
‧Supports audio output (MP3, Wav files)
‧Touch screen complies with IP65
‧Supports horizontal / vertical display
‧Editing software, DOPSoft is compatible with operating systems: Windows XP, Windows Vista, Windows 7

  • Touch screen complies with IP65
  • 10.1" TFT LCD 65536 colors
  • 1024 x 600 pixel
  • Supports SD card
  • Supports USB Host, direct connection to USB disk, printer and mouse
  • *

DOP-B Series

Touch screen
Display
Resolution
Memory
USB
Languages

Specifications

‧8"(800 x 600 pixels) TFT LCD 65536 colors
‧3 sets of COM ports, support RS232 / RS422 / RS485
‧For data transfer/download: RS232, USB
‧Supports USB Host, direct connection to USB disk, printer and mouse
‧Supports SD card
‧Touch screen complies with IP65
‧Supports horizontal / vertical display
‧Editing software, DOPSoft is compatible with operating systems: Windows XP, Windows Vista, Windows 7


  • Touch screen complies with IP65
  • 8" TFT LCD 65536 colors
  • 800 x 600 pixels
  • Supports SD card
  • Supports USB Host, direct connection to USB disk, printer and mouse
  • *

DOP-B Series

Touch screen
Display
Resolution
Memory
USB
Languages

Specifications

‧8"(800 x 600 pixels) TFT LCD 65536 colors
‧3 sets of COM ports, support RS232 / RS422 / RS485
‧For data transfer/download: RS232, USB, Ethernet
‧Supports USB Host, direct connection to USB disk, printer and mouse
‧Supports SD card
‧Supports Ethernet
‧Supports audio output (MP3, Wav files)
‧Touch screen complies with IP65
‧Supports horizontal / vertical display
‧Editing software, DOPSoft is compatible with operating systems: Windows XP, Windows Vista, Windows 7


  • Touch screen complies with IP65
  • 8" TFT LCD 65536 colors
  • 800 x 600 pixels
  • Supports SD card
  • Supports USB Host, direct connection to USB disk, printer and mouse
  • *

کپی رایت © شرکت آراد اتوماسیون 2002-2014 همه حقوق محفوظ است.